Tank Bottoms
RemediationTank BottomsFlow LineProductionSpecialtyContact Us

Home>Tank Bottoms

 

 

 

PETRO-RECOVER SERIES OF PRODUCTS

 

The Petro-Recovery series of products combine a unique blend of surface active compounds along with several proprietary, solubilization chemistries that are derived from an Environmental Waste Stream.  In addition to being proven to liquefy paraffin and asphaltene, thus allowing for use in a wide range of applications, you can "Optimize your process through a Green Initiative".

There are Four (4) base products in the Petro-Recover series, each specifically designed for optimum results (custom formulations are available).  Below is a brief description of each

  • Petro-Recover 100 & 110 are products designed specifically for reliquifying petroleum (hydrocarbon) based sludges, sediment and solids. PR100 is for Paraffin-based sludges while PR110 is for Asphaltene-Based sludges.  The hydrocarbon chains are reliquified, the viscosity reduced by 80% or more and the API gravity increased.  Typically, recovery rates of over 95% of the available hydrocarbons is achieved.
  • Petro-Recover 200 is a product designed specifically for treating slop oils.  In addition to the viscosity and API features of PR-100, PR-200 provides demulsification, thus easier water and solids separation.  It also allows for a higher percentage recovery of the available hydrocarbons.
  • Petro-Recover 300 is a product designed for the pre-treatment of SAG-D wells, specifically the initial process of getting the wells to "communicate".  Use of the product speeds the dissolution of bitumum and similar heavy oil deposits.  As such, the amount of steam is greatly reduced and the time line for start-up is minimized.

Click Here for Petro-Recover 100-110-200-300 TDS.

Click Here for Petro-Recover 100 MSDS.   Petro-Recover 110 MSDS.   Petro-Recover 200 MSDS. Petro-Recover 300  MSDS.

 

  • Vapor-Scrub is a product that can be used in conjunction with the Petro-Recover products.  It is a synthesized, encapsulating chemistry.   It semi-permanently binds hazardous vapors present in the headspace and creates a micro-emulsion that continues to assist in the further treatment of solids and hydrocarbons in the tank cleaning process.

Click Here for Vapor-Scrub TDS.       Click Here for Vapor-Scrub MSDS.

 

 

 CASE STUDIES

 

Midwest Tank Bottoms: A number of tanks from 200 bbl to 500 bbl had tank heels that were treated with Petro-Recover 100. Conventional clean-out consisted of hot oil and/or physical removal methods.  All bottoms were liquefied and ~425 bbl of sell-able oil recovered.

 Click Here to Read Entire Case Study

Northwest Tanks Bottoms:  A number of tanks from 100 bbl to 300 bbl had tank heels that were treated with Petro-Recover 100. Conventional clean-out consisted of hot oil and/or physical removal methods.  All bottoms were liquefied and ~380 bbl of sell-able oil recovered.

Click Here to Read Entire Case Study

Large Tank Cleaning:   A 10,000 bbl was taken off line due to sludge build-up in the bottom.  Conventional clean-up took 18 days and returned ~65% hydrocarbons.  Using Petro-Recover 100, the tank was out of service for 3 days and 97.5% hydrocarbon was recovered.

Click Here to Read Entire Case Study

Tank Bottom Processing:  Bison Gulf Processors specializes in processing and the recovery of merchantable hydrocarbons from waste sludge associated with crude oil production and transportation.  Since the introduction of the Petro-Recover technology, recovery rates have increased and quality has improved.

Click Here to Read Entire Case Study

 

 

[Home][Remediation][Tank Bottoms][Flow Line][Production][Specialty][Contact Us]

Copyright(c) 2002 My Company. All rights reserved.
lentwall@earthlink.net